Product

Split fire electrical control device (fire pump control equipment)

The MX-XF2/FT split type fire electrical control device (fire pump control equipment) is a product designed to meet the needs of fire protection electrical control devices (fire pump control equipment) and in compliance with the GB16806-2006 standard. It is used for fire pump control equipment. The logic operation, automatic remote signal processing, contact boundary drive, voltage and current display and load fault protection switching are suitable for the logic in the check start of fire water pumps, star-delta step-down start, soft start control cabinet, and self-stepping start cabinet. control.

Product Detail

product detail

Product overview

Features

Linkage and fault alarm controller

It adopts an intelligent alarm chip to meet fire protection standards, and the sound can reach 65 decibels and above at a distance of 1.5m.

Easy to operate, electronic lock with password

a. You need to enter the correct password to operate the panel keys.

b. There are two buttons on the controller panel: "First pump failover" and "Second pump failover" to facilitate users to debug the cabinet.

Intuitive display

a. Multi-line digital display of parameters and codes, Chinese character display of fault status, current magnification barcode gear display, high-end atmosphere, highly integrated.

b.Φ5 indicator light indicates the system working mode and signal status, and can distinguish colors up to 6m away.

Simple and reliable structure

a. Replace all traditional secondary circuit components, simplify the structure and improve production efficiency.

b. Use a through-core current transformer to accurately collect the three-phase current of the motor and monitor the motor operating status timely and reliably.

Technical parameters

Working power supply	DC24V
Number of consoles	One use and one backup
enter	Digital input
output	Relay switch node output
Moisture proof method	3 layers of conformal paint, some components are treated with can paint
Ambient temperature and humidity	Relative humidity: ≤90RH%, temperature: -10~40℃, in line with the testing standards of the Fire Protection Research Institute
surge impact	Three-phase four-wire crossover ±2000v, in line with the testing standards of the Fire Protection Research Institute
electrostatic discharge	The front side of the controller is 8000V, which complies with the testing standards of the Fire Protection Research Institute
Radiation immunity	80-1000MHz, 10V/m, 10min, in line with the testing standards of the Fire Protection Research Institute
electrical fast burst	±2500V, 5KHz, complies with Fire Protection Research Institute testing standards
Protection level	Front: IP42